Waveshare RP2350 PiZero Development Board, Based On Pi Dual Core & Architecture Microcontroller, 520KB SRAM 16MB Onboard Flash Memory, Compatible with Raspberry 40PIN GPIO Header

RP2350-PiZero is a high-performance microcontroller board, onboard DVI interface, TF card slot and PIO-USB port, compatible with Raspberry Pi 40PIN GPIO header, with reserved solder pads for PStatic RAM chip expansion, easy to develop and integrate into products Adopts unique dual-core and dual-architecture design: dual ARM Cortex-M33 or dual Hazard3 RISC-V processors support, flexible clock running up to 150 MHz. 520KB of Static RAM, and 16MB of onboard Flash memory, with reserved solder pads for PStatic RAM chip expansion Type-C connector for easier use. Onboard DVI interface can drive most HDMI screens (DVI compatibility required). Onboard TF card slot for reading and writing TF card. Onboard Lithium battery recharge/discharge header, suitable for mobile scenarios Supports using as a USB host or device via onboard PIO-USB port. USB 1.1 with device and host support. Low-power sleep and dormant modes. Drag-and-drop programming using mass storage over USB Adapting 5xmulti-function GPIO pins. 2xSPI, 2xI2C, 2xUART, 2x12-bit ADC, 16xcontrollable PWM channels. Accurate clock and timer on-chip. Temperature sensor. Accelerated floating-point libraries on-chip. 12xProgrammable I/O (PIO) state machines for custom peripheral support

Placa de desarrollo RP2350-PiZero, basada en el microcontrolador de doble núcleo y doble arquitectura Pi RP2350, con 16 MB de memoria flash integrada y compatible con el conector GPIO de 40 pines de Raspberry Pi